Strata Residential & Commercial Office Building
LED Lighting is ideal for residential Strata buildings and commercial office buildings throughout Sydney as they share common area spaces that can have extensive energy usage, housing old & costly technology. Existing in-efficient lighting, refrigeration, HVAC, computers etc all contribute to larger energy bills. This includes car parks, fire stairs, hallways, kitchens, office space and restrooms.
In this blog we will focus on the old, in-efficient lighting in these spaces that can consume a considerable amount of energy, and the recommended LED Lighting to replace these old lights.
Fire Stairs and Carpark, Existing Lighting
- 36W 4FT or 18W 2FT T8 fluorescent tubes with an 8W magnetic ballast
- Lighting usually operates 24 / 7
- Significant maintenance costs as lighting has a short life period compared to LED tubes / LED plates and existing fluorescent tubes likely operate constantly, year round.
- Fluorescent tubes have poor light output in comparison to their LED equivalent
Recommended Upgraded LED Lighting, Fire Stairs and Carpark
- 20W 2FT LED Emergency and 18W 2FT Standard LED Fitting with integrated electronic ballast.
- Lighting operates on a motion sensor and dims to only 5W or 7W (Emergency) in stand-by mode, until movement is detected and the LED lighting is needed, returning to full light output.
- Maintenance cost savings with longer rated life than old T8 fluorescent tubes. LED Fittings have a 50,000 hour rated life.
- Further maintenance savings as a result of energy efficient lighting no longer operating 24/7 due to motion sensor.
- Higher lighting output at a lower wattage. 20W LED Emergency luminaire will give the same or greater lighting output than twin 36W 4FT T8 fluorescent tubes with an 8W, old magnetic ballast.
That’s a power reduction of 68 Watts per fitting before the motion sensor is even activated.
- There are further reductions in energy consumption due to the motion sensor. Energy is therefore not wasted and only consumed when needed. This results in a very cost effective, energy efficient alternative to your existing lights.
- The motion sensor timer has a setting for full light output at 5 seconds, 30 seconds, 90 seconds or 3 mins.
- LED fittings are ideal for car park and fire stairs, with an IP65 rating and can be ceiling or wall mounted.
- LED is eligible for use under the NSW Energy Savings Scheme, the LED fitting is supplied and installed with a guaranteed discount, which is applied to your quote at point of sale.
- This discount and the significant energy savings result in a commercially viable ROI.
Workshops and Factories, Existing in-efficient Lighting
- 250W, or 400W Mercury Vapour High bays with 24W Magnetic Ballast
- Significant maintenance costs, including high installation costs when existing lights fail
- Poor light output compared to LED replacement
Recommended Upgraded LED High Bays, Workshop, Factories
- 95W or 110W LED High Bay with integrated electronic ballast
- Higher light output with much lower wattage
- LEDs with 150 lumens per watt means brighter workspace for your employees
- 424W down to 95W LED High Bay, reduced energy consumption of 329W per lamp!
- Higher light levels at much lower power consumption means you are not paying for electricity you do not need. Very energy efficient solution for your workshop or factory
- Lower electricity bills, particularly at a time when energy retailers are spiking the energy rates!
- Trusted Meanwell driver. Existing magnetic drivers consume 24W in addition to the MV lamp
- Optional microwave sensor to further reduce power consumption
- LED is eligible for use under the NSW Energy Savings Scheme, the LED fitting is supplied and installed with a guaranteed discount, which is applied to your quote at point of sale.
- The discount and huge energy savings result in a commercially viable ROI
Hotels, RSL’s, Commercial Offices, Entrance Lobbies, Retail – Existing in-efficient Lighting
- 50W or 35W Halogen Downlight with Magnetic or Electronic Driver
- Operating hours are long, up to 24 hours per day in many hotel common areas
- Very in-efficient, high wattage for low light output
Recommended Upgraded LED Lighting for Hotels, RSL’s, Commercial Offices, Entrance Lobbies, Retail
- 8.5W (non-dimmable) or 9.5W (dimmable) LED Lamp and Driver
- 50W halogen with 10W magnetic ballast down to 9.5W LED, results in energy reduction of 50.5 Watts per lamp!
- LED Downlights in bright white (4000K) or warmer tone (3200K) for different environments
- High light output with heavily reduced power consumption
- Flex and plug
- Tried and tested over many years as a very reliable LED lamp, with extremely low attrition rate
- For Lamp only application, Philips 7W Master LED Lamp only. We installed 4,300 of these in the Hilton Guestrooms in warm 3,000K